Moisture Exposure and Caking
A matched liner and closure help limit external moisture exposure during storage. Select the combination around your sugar grade, humidity and storage period.
Custom FIBC Packaging
Custom FIBC Bulk Bags for Sugar
For your granulated or refined sugar, the bag, liner and openings need to suit both food-contact requirements and daily handling. Discuss custom empty FIBC bags with XIFA, with dimensions and connections matched to your packing line.
For sugar mills, refiners, ingredient packers, importers and packaging distributors.
Industrial Packaging Experience
Packaging Partners Across Industries
Your sugar packaging has to fit food-contact requirements, bagging equipment and repeat-order planning. XIFA’s wider packaging experience helps you discuss these priorities together, from the liner and openings to printing and shipment requirements.
Buyer Requirements
Keep Your Sugar Packaging Working from Filling to Discharge
Your sugar bulk bags need to contain fine particles, manage moisture exposure and fit the receiving line. Bring food-contact requirements, storage conditions and equipment dimensions into the same packaging specification.
Fine Sugar Containment
Fine grains need attention at seams and closures. Combine the relevant fabric, seam and liner options to help reduce product loss around your handling line.
Food-Contact Materials
Your contact surfaces and destination market determine the documents needed. Agree the fabric or film specification and required food-contact evidence during supplier review.
Reliable Equipment Connections
Matched inlet and outlet dimensions help your team fill and empty each bag. Liner retention supports alignment through the discharge process.
Bag Configurations
Choose the Bag Construction for Your Sugar
Choose your sugar bulk bag around food-contact requirements, packing-line connections and filled shape. Use these options to discuss the construction you need for your next order.
CONFIGURATION 01
Spout-Top / Spout-Bottom FIBC
Connect your sugar filling and receiving equipment through matched spouts. Specify the openings, closures and lifting arrangement around your line and target payload.
CONFIGURATION 02
Sugar FIBC with PE Liner
Add a defined contact surface and fine-particle containment layer. Match PE film grade, thickness, shape and seals to your food-contact and storage requirements.
CONFIGURATION 03
Baffle FIBC for Your Pallet Layout
Discuss a baffled construction when filled shape matters to your pallet plan. Review internal flow paths, dimensions and liner fit with your actual sugar.
CUSTOMIZATION OPTIONS
Configure a Custom FIBC Bag for Your Sugar
Configure your sugar bulk bag around contact materials, filling connections and pallet layout. Select the body, liner, lifting arrangement and rated load together for your sugar type and handling process.
Bag Body
Keep your filled sugar bag within its planned footprint.
Your Configuration Options
Build Your Specification
- Sugar type and particle distribution
- Net weight and loose bulk density
- Pallet footprint and filled height
Assess a baffled design with your actual sugar before fixing the layout.
Top Construction
Match your inlet to the sugar filling nozzle.
Your Configuration Options
Build Your Specification
- Nozzle diameter and filling rate
- Dust extraction connection
- Closure and liner inlet dimensions
Choose the opening around the way your line fills and closes each bag.
Bottom Construction
Help your sugar reach the receiving line cleanly.
Your Configuration Options
Build Your Specification
- Receiving hopper connection
- Sugar flow and residual-product concerns
- Outlet length and liner anchoring
Check the outlet with the receiving equipment during evaluation.
Inner Liner
Define the surface that contacts your sugar.
Your Configuration Options
Build Your Specification
- Destination market and contact documents
- Film thickness and agreed tolerances
- Liner shape, seals and fixing points
Review the selected liner through our food-grade FIBC solution.
Lifting Loops
Fit your loops to warehouse handling.
Your Configuration Options
Build Your Specification
- Fork spacing and loop clearance
- Loop position on the bag drawing
- Movement between filling and storage
Allow for the filled bag when checking fork access.
Safe Working Load
Translate your sugar fill weight into a rated bag.
Your Configuration Options
Build Your Specification
- Net sugar weight per bag
- Bag rating and supporting records
- Single-use or specified use requirements
Agree the rating and use instructions before ordering repeat quantities.
Static Protection
Review sugar dust and the operating environment together.
Your Configuration Options
Build Your Specification
- Sugar dust characteristics
- Filling and emptying conditions
- Required system classification and records
Select static controls from the assessment rather than the sugar name alone.
Discuss Your Sugar Packaging Specification
Send your material name, target fill weight and current bag drawing or photograph. You can clarify the remaining configuration and order details with XIFA during quotation review.
Since 1998
Packaging Manufacturing
03
Production Bases
Custom
Bag Specifications
Export
Order Coordination
Specification & Customisation
Match Your Bag to Your Sugar and Handling Equipment
Bring your material, equipment and order requirements together in one specification. XIFA can help you clarify the construction details needed for your quotation.
| Specification | Specification Inputs | Configuration Details |
|---|---|---|
| Sugar type / particle size | Identify granulated or refined white sugar and particle distribution. | For raw, brown or powdered sugar, include the moisture and flow characteristics needed to develop the configuration. |
| Food-contact requirements | Specify your market, contact surfaces and required documents. | Request documents tied to the selected film, fabric, destination market and intended food contact. |
| Liner / storage | State your film, closure, storage period and humidity requirements. | Coordinate film and closure with your sugar moisture, storage duration and warehouse conditions. |
| Fine sugar / site conditions | Share dust characteristics and your site assessment where applicable. | Use the material and site assessment to select the electrostatic configuration for the complete bag–liner system. |
| Filling weight / SWL | State your target net weight per bag and measured bulk density. | Select the rated Safe Working Load and safety factor for your target payload, supported by the relevant design records. |
| Dimensions / construction | Provide length × width × height in mm and your preferred body design. | Coordinate usable volume, filled shape, pallet footprint and equipment clearance on your approved drawing. |
| Filling / discharge openings | Specify inlet and outlet diameter, length, connection and closure. | Match liner openings to your equipment and outer bag; include how you retain the liner during discharge. |
| Lifting / handling | Describe forklifts, lifting frames, loop positions and your handling cycle. | Match loop length and clearance to your equipment, with handling and use instructions for the supplied bag. |
| Liner / sealing details | Provide film grade, thickness in microns, attachment and seal requirements. | Specify film tolerances, sealing details and test conditions alongside any outer-fabric coating. |
| Printing / traceability | Send artwork, language, batch identification and document-pocket needs. | Approve label content, print position and revision. Link your purchase specification to the drawing and agreed order records. |
| Site / special requirements | Share your SDS and electrostatic or special transport assessment where relevant. | Define electrostatic performance for the bag–liner system and review any transport-design requirements through their applicable documents. |
| Order / shipment | Provide quantity, destination, requested date and repeat-order forecast. | Agree commercial terms, production milestones and dispatch timing for your selected specification and destination. |
Manufacturing Network
Explore XIFA's
Explore XIFA's
Manufacturing Network
XIFA's manufacturing network includes Wenzhou, Jiangxi and Laos, supporting its wider industrial packaging business. Share your required bag construction, order volume and delivery destination to discuss the relevant production route and order coordination.
Industrial Packaging Manufacturing and Supply
XIFA manufactures woven packaging and FIBC bulk bags for overseas importers, distributors and industrial buyers. Your bag construction, liner and order requirements guide the production and quotation discussion.
Coordinate Your Packaging Order
From your approved drawing to shipment planning, XIFA coordinates the details that matter to your order. Discuss the production base, required documents and dispatch schedule for your selected FIBC specification.
Zhejiang · China
Wenzhou Manufacturing Facility
XIFA’s Wenzhou facility forms part of its woven-packaging manufacturing network. Discuss your custom packaging requirements and order coordination with our team.
Jiangxi · China
Jiangxi Manufacturing Base
Jiangxi Minzheng forms part of XIFA’s bulk-bag manufacturing network, connecting your FIBC construction requirements with production and scheduling discussions.
Laos
Laos Facility
The Laos facility extends XIFA’s manufacturing network. Your quotation review identifies the production and shipment arrangements relevant to your order.
Supplier Evaluation
Visit XIFA to Discuss Your Packaging Project
Meet XIFA’s team to discuss your bag specification, view the factory environment and plan your order. Bring your purchasing and technical questions for a focused conversation about your packaging requirements.
Customer Visit and Business Communication
Customer Reception at XIFA
International Business Meeting
Packaging Business Discussions
Customer Visit to XIFA Facilities
International Business Engagement
FIBC Buyer FAQ
Sugar FIBC Bags:
Sugar FIBC Bags:
Common Buyer Questions
Clarify your specification, documentation and order requirements before requesting a sugar packaging quotation.
Can you manufacture to our existing sugar bag specification?
Send your current drawing, specification or clear packaging photographs.
- Include sugar type, net weight, food-contact requirements and equipment connections.
- XIFA can review the structure and clarify missing dimensions before quoting.
- For powdered, raw or brown sugar, include the moisture and flow properties that affect your liner and discharge requirements.
What food-contact documents can you provide?
Specify your destination market, actual contact materials and intended use.
- Ask XIFA to confirm which documents are available for the selected configuration before ordering.
- Your supplier review can bring together contact-material documents, relevant management-system certificates and bag-strength records, each matched to its intended purpose.
What is the minimum order quantity?
Your MOQ is confirmed for the bag construction, liner and printing specified in your enquiry.
- Include your expected purchase quantity and replenishment forecast when requesting a quotation.
- XIFA can then quote the configuration and quantity you need.
- Include your replenishment forecast so the order discussion also covers repeat supply.
Can we request a sample before ordering?
Discuss a sample matched to the specification you want to evaluate.
- Define what you want to evaluate: dimensions, openings, closure, liner retention or equipment fit.
- Agree the sample type, charges and dispatch arrangements, together with any performance records needed for specification approval.
How is the production lead time confirmed?
Share your quantity, requested date and specification status.
- XIFA reviews the drawing, liner, artwork and materials to confirm your production schedule.
- Agree when the quoted lead time begins and distinguish factory dispatch from arrival at your destination.
- Changes after approval may require a revised schedule.
Can you support repeat orders for distributors?
Discuss your forecast, specification revisions, artwork and shipment requirements with XIFA.
- Keep the approved drawing and order reference consistent when requesting repeat supply, and flag changes to your material or equipment.
- Agree your replenishment quantities, production slots and shipment arrangements so each repeat order has a clear delivery plan.
