Moisture and Atmosphere Control
A sealed liner helps you manage external moisture and air exposure. Specify your storage conditions and required barrier performance for the solid grade you pack.
Custom FIBC Packaging
Custom FIBC Bags for Lithium Hydroxide
For your solid lithium hydroxide, the contact layer, sealed liner and outer bag need to work together. XIFA helps you develop an empty FIBC specification around your product form, storage requirements and filling and discharge equipment.
For lithium hydroxide producers, refiners, lithium-salt exporters and chemical packaging buyers.
Industrial Packaging Experience
Packaging Partners Across Industries
Your lithium hydroxide packaging needs clear coordination between product requirements, bag construction and shipment planning. Work with XIFA to review your specification and turn it into a practical basis for sourcing custom FIBC bags.
Buyer Requirements
Protect Your Lithium Hydroxide through Filling and Storage
For solid lithium hydroxide packaging, focus on contact compatibility, environmental isolation, secure closures and equipment fit. Your product SDS and packing specification give the bag-and-liner review a clear technical starting point.
Compatible Contact Surfaces
Your liner’s contact polymer and seals form the immediate packaging surface. Match these materials to your product specification and compatibility requirements.
Secure Filling and Discharge
Matched spouts and liner retention help keep your connections aligned. Define the closures and equipment interfaces needed for controlled filling and emptying.
Shipment-Ready Documentation
Your shipment review needs documents tied to the actual product and packaging design. Include your SDS, transport mode and destination when discussing the proposed bag.
Bag Configurations
Discuss Bag and Liner Options for Your Lithium Hydroxide Product
Bring your product form, contact requirements and storage conditions into one bag specification. Compare these construction approaches with XIFA to identify the configuration and supporting documents your purchasing team needs.
CONFIGURATION 01
PP Outer Bag with a Sealed Liner
Combine mechanical support with a product-matched contact liner. Coordinate bag dimensions, liner allowance and attachment points for your filling weight and handling method.
CONFIGURATION 02
Barrier Liner for Your Storage Requirements
Choose the laminate around your moisture and atmosphere limits. The contact layer, barrier layers and seals are specified together for your product and storage period.
CONFIGURATION 03
FIBC Design for Your Shipping Requirements
Bring your SDS and intended route into the design review. XIFA can clarify the available packaging scope, relevant records and configuration needed for your quotation.
CUSTOMIZATION OPTIONS
Configure a Custom FIBC Bag for Your Lithium Hydroxide
Build your lithium hydroxide bag around the product-contact liner, sealing process and handling route. Coordinate the body, openings, lifting loops and rated load with your equipment and shipment requirements.
Bag Body
Build around your solid product and packing line.
Your Configuration Options
Build Your Specification
- Solid monohydrate or anhydrous grade
- Target payload and measured bulk density
- Pallet dimensions and filled-bag clearance
Confirm your product form before fixing the body dimensions.
Top Construction
Connect your filling line to a securely closed liner.
Your Configuration Options
Build Your Specification
- Nozzle diameter and insertion length
- Liner sealing equipment and access
- Containment requirements during filling
Include your current filling arrangement with the bag drawing.
Bottom Construction
Plan discharge around your receiving equipment.
Your Configuration Options
Build Your Specification
- Receiving connection and working clearance
- Outlet closure and opening sequence
- Liner retention during emptying
Specify how your liner outlet connects before approving the bottom.
Inner Liner
Choose the contact layer before the barrier structure.
Your Configuration Options
Build Your Specification
- Contact resin and liner thickness
- Moisture and atmosphere limits
- Seal integrity and exposed-metal prevention
Provide separate evidence for any specified CO₂ barrier requirement.
Lifting Loops
Make your bag accessible to the lifting equipment.
Your Configuration Options
Build Your Specification
- Fork or lifting-frame dimensions
- Loop height and attachment positions
- Transfer route and handling frequency
Include the receiving site’s lifting method in your specification.
Safe Working Load
Set the payload within the selected design rating.
Your Configuration Options
Build Your Specification
- Net fill weight and density
- Required label and design records
- Intended transport mode and route
Review transport suitability separately from the lifting rating.
Static Protection
Address static conditions as part of your site review.
Your Configuration Options
Build Your Specification
- Current product SDS
- Filling and discharge environment
- Evidence for the selected bag–liner system
Coordinate static performance, contact compatibility and transport documentation within your full packaging specification.
Discuss Your Lithium Hydroxide Packaging Specification
Send your material name, target fill weight and current bag drawing or photograph. You can clarify the remaining configuration and order details with XIFA during quotation review.
Since 1998
Packaging Manufacturing
03
Production Bases
Custom
Bag Specifications
Export
Order Coordination
Specification & Customisation
Start with Your Product Form, SDS and Packing Specification
Bring your material, equipment and order requirements together in one specification. XIFA can help you clarify the construction details needed for your quotation.
| Specification | Specification Inputs | Configuration Details |
|---|---|---|
| Product form / grade | Identify monohydrate, anhydrous solid or another form. | Specify solid monohydrate first; include grade-specific requirements for anhydrous material. |
| Current SDS | Provide the SDS for your actual supplied product. | Use the storage, incompatibility and transport information for your actual product to guide the design review. |
| Contact layer / barrier | Provide your liner structure, thickness and sealing method. | Coordinate contact compatibility, laminate integrity and seals. For a CO₂ target, request data specific to that gas and test method. |
| Transport / destination | Specify your mode, route and shipment requirements. | Match the proposed design, liner, payload and documents to your intended transport use. |
| Filling weight / SWL | State your target net weight per bag and measured bulk density. | Select the rated Safe Working Load and safety factor for your target payload, supported by the relevant design records. |
| Dimensions / construction | Provide length × width × height in mm and your preferred body design. | Coordinate usable volume, filled shape, pallet footprint and equipment clearance on your approved drawing. |
| Filling / discharge openings | Specify inlet and outlet diameter, length, connection and closure. | Match liner openings to your equipment and outer bag; include how you retain the liner during discharge. |
| Lifting / handling | Describe forklifts, lifting frames, loop positions and your handling cycle. | Match loop length and clearance to your equipment, with handling and use instructions for the supplied bag. |
| Liner / sealing details | Provide film grade, thickness in microns, attachment and seal requirements. | Specify film tolerances, sealing details and test conditions alongside any outer-fabric coating. |
| Printing / traceability | Send artwork, language, batch identification and document-pocket needs. | Approve label content, print position and revision. Link your purchase specification to the drawing and agreed order records. |
| Site / special requirements | Share your SDS and electrostatic or special transport assessment where relevant. | Define electrostatic performance for the bag–liner system and review any transport-design requirements through their applicable documents. |
| Order / shipment | Provide quantity, destination, requested date and repeat-order forecast. | Agree commercial terms, production milestones and dispatch timing for your selected specification and destination. |
Manufacturing Network
Explore XIFA's
Explore XIFA's
Manufacturing Network
XIFA's manufacturing network includes Wenzhou, Jiangxi and Laos, supporting its wider industrial packaging business. Share your required bag construction, order volume and delivery destination to discuss the relevant production route and order coordination.
Industrial Packaging Manufacturing and Supply
XIFA manufactures woven packaging and FIBC bulk bags for overseas importers, distributors and industrial buyers. Your bag construction, liner and order requirements guide the production and quotation discussion.
Coordinate Your Packaging Order
From your approved drawing to shipment planning, XIFA coordinates the details that matter to your order. Discuss the production base, required documents and dispatch schedule for your selected FIBC specification.
Zhejiang · China
Wenzhou Manufacturing Facility
XIFA’s Wenzhou facility forms part of its woven-packaging manufacturing network. Discuss your custom packaging requirements and order coordination with our team.
Jiangxi · China
Jiangxi Manufacturing Base
Jiangxi Minzheng forms part of XIFA’s bulk-bag manufacturing network, connecting your FIBC construction requirements with production and scheduling discussions.
Laos
Laos Facility
The Laos facility extends XIFA’s manufacturing network. Your quotation review identifies the production and shipment arrangements relevant to your order.
Supplier Evaluation
Visit XIFA to Discuss Your Packaging Project
Meet XIFA’s team to discuss your bag specification, view the factory environment and plan your order. Bring your purchasing and technical questions for a focused conversation about your packaging requirements.
Customer Visit and Business Communication
Customer Reception at XIFA
International Business Meeting
Packaging Business Discussions
Customer Visit to XIFA Facilities
International Business Engagement
FIBC Buyer FAQ
Lithium Hydroxide FIBC Bags:
Lithium Hydroxide FIBC Bags:
Common Buyer Questions
Clarify your specification, documentation and order requirements before requesting a lithium hydroxide packaging quotation.
Which lithium hydroxide forms can we discuss?
Start with your solid lithium hydroxide monohydrate requirements.
- For anhydrous grades, include the product SDS and current packaging specification.
- State the grade and particle form so your contact materials and closures can be reviewed accurately.
- For solutions, contact XIFA about a separate packaging enquiry.
How does our SDS help you specify the bag?
Your SDS connects the packaging review to the product you actually ship.
- Storage and incompatibility information guide contact-layer and sealing discussions.
- Transport information helps identify the packaging documentation needed for your route.
- Send the current product SDS alongside your existing bag specification to keep the review focused.
Can you work from our lithium carbonate bag drawing?
Your existing drawing is useful for dimensions and equipment connections.
- For lithium hydroxide, the contact layer, closures and shipment requirements are reviewed against its own specification.
- Include any differences in grade, fill weight or storage conditions.
- XIFA can then identify which construction details can be retained and which need further development.
How should we specify an aluminium foil liner?
Describe the complete laminate, including the polymer that contacts your product.
- Specify the contact resin, layer sequence, thickness and sealing method.
- Include the moisture and gas barrier performance you need, with the relevant test conditions.
- Contact compatibility and laminate integrity are assessed together, including protection against exposed metal.
What do you need to review dangerous goods packaging?
Provide your actual product SDS, intended transport mode, route and filling weight.
- The packaging review covers permitted packaging, available design records and the proposed liner and closures.
- XIFA can clarify whether a documented supply design is available for your intended use.
- Final selection follows the applicable transport requirements and the approved design’s conditions.
How do we obtain a quotation and production schedule?
Send your product form, fill weight, quantity and current packing specification.
- Add the liner requirements, destination and requested date where available.
- Your quotation follows review of the configuration, required documents and production scope.
- Sample arrangements and dispatch timing are agreed for the selected design and order.
