Load and Handling Fit
Measured bulk density and target payload guide bag sizing. Coordinate the body, bottom and lifting loops with the way your site moves each filled bag.
Custom FIBC Packaging
FIBC Bulk Bags for Mining & Minerals
For your mineral powders or granules, the bag construction needs to suit the material and handling load. Discuss custom empty FIBC bags with XIFA, with seams, liner options and openings matched to your filling and discharge process.
For mineral processors, grinding and blending businesses, concentrate packers, exporters and packaging distributors.
Industrial Packaging Experience
Packaging Partners Across Industries
Your mineral bag has to carry the specified load, contain the material and work with site equipment. XIFA’s industrial packaging experience gives you a practical route to discuss construction, liner selection and bulk-order requirements together.
Buyer Requirements
Match Your Mineral Bag to the Load and Handling Route
Your mineral bulk bags need mechanical support, suitable containment and practical discharge connections. Use the material’s density, particle profile and filling state to define a construction suited to your equipment and storage conditions.
Fine-Powder Containment
Fine mineral powders need attention at stitched seams and closures. Discuss seam treatments, coating and liners around your particle distribution and containment requirements.
Moisture and Contact Protection
Some minerals need additional separation from fabric or external humidity. Define your storage exposure and contact requirements before selecting the liner and closure.
Practical Discharge
Outlet dimensions and liner retention affect emptying. Include known bridging, settling or residual-material issues so the proposed arrangement addresses your receiving process.
Bag Configurations
Choose FIBC Configurations for Your Mineral Material
Compare mineral bulk bag configurations by particle profile, payload and handling method. Your material and site requirements guide the choice of body, seams, openings and liner.
CONFIGURATION 01
FIBC for Mineral Powders
Match the body and seam construction to your powder’s density and particle size. Specify openings and liner options around filling, containment and discharge requirements.
CONFIGURATION 02
FIBC for Granular Minerals
Review your grain shape, abrasion and transfer route with XIFA. Coordinate seams, bottom and loops as part of the complete rated bag design.
CONFIGURATION 03
Lined FIBC for Your Mineral Specification
Add a liner where moisture, contact or fine-powder requirements call for it. Specify film, attachment and closure for the mineral and equipment you use.
CUSTOMIZATION OPTIONS
Configure a Custom FIBC Bag for Your Mining and Minerals
Choose your mineral bag construction around particle profile, density and site equipment. Match the inlet, outlet, liner and lifting arrangement to your filling state, handling route and required load rating.
Bag Body
Start with density, particle shape and handling loads.
Your Configuration Options
Build Your Specification
- Material composition and particle profile
- Measured density and filling state
- Payload and handling route
Assess seams, bottom and loops together with the fabric.
Top Construction
Fit your mineral filling process without restricting access.
Your Configuration Options
Build Your Specification
- Chute dimensions and filling rate
- Aeration and dust extraction
- Closure and liner opening
Use your actual filling state when reviewing the inlet arrangement.
Bottom Construction
Design your outlet around the material’s flow.
Your Configuration Options
Build Your Specification
- Granule size and bridging tendency
- Receiving equipment connection
- Discharge clearance and residual material
Provide known discharge difficulties with your current bag specification.
Inner Liner
Add a liner where your mineral needs separation.
Your Configuration Options
Build Your Specification
- Material-contact compatibility
- Storage exposure and seal requirements
- Liner thickness and attachment
Assess particle abrasion through the body construction and handling route alongside your liner requirements.
Lifting Loops
Match your loops to site lifting equipment.
Your Configuration Options
Build Your Specification
- Lifting-frame or forklift dimensions
- Free loop height and positions
- Handling cycle and site constraints
Check loop access with your proposed filled-bag shape.
Safe Working Load
Specify load capacity from your mineral and handling route.
Your Configuration Options
Build Your Specification
- Target fill weight
- Required rating and label details
- Handling and any special transport conditions
Higher fabric weight alone does not establish the complete bag rating.
Static Protection
Review special requirements for the particular mineral.
Your Configuration Options
Build Your Specification
- SDS where applicable
- Dust and operating conditions
- Required system evidence
Keep special transport-design requirements separate from static classification.
Discuss Your Mining and Minerals Packaging Specification
Send your material name, target fill weight and current bag drawing or photograph. You can clarify the remaining configuration and order details with XIFA during quotation review.
Since 1998
Packaging Manufacturing
03
Production Bases
Custom
Bag Specifications
Export
Order Coordination
Specification & Customisation
Specify Your Bag Around the Material and Handling Conditions
Bring your material, equipment and order requirements together in one specification. XIFA can help you clarify the construction details needed for your quotation.
| Specification | Specification Inputs | Configuration Details |
|---|---|---|
| Material / composition | Name your mineral or concentrate and provide composition where relevant. | Identify your specific mineral and grade so XIFA can assess construction and supply requirements for the enquiry. |
| Particle size / abrasion | Provide particle distribution, shape and any sharp or abrasive fraction. | Review fabric, seams, loops and bottom as a complete design against your particle shape and handling demands. |
| Density / filling state | Provide measured loose bulk density and filling behaviour. | Account for aeration, settlement and filled shape when confirming usable volume and stability. |
| Temperature / storage | State filling temperature, storage period and exposure conditions. | Match filling temperature, storage duration and exposure to the selected materials and documented design conditions. |
| Filling weight / SWL | State your target net weight per bag and measured bulk density. | Select the rated Safe Working Load and safety factor for your target payload, supported by the relevant design records. |
| Dimensions / construction | Provide length × width × height in mm and your preferred body design. | Coordinate usable volume, filled shape, pallet footprint and equipment clearance on your approved drawing. |
| Filling / discharge openings | Specify inlet and outlet diameter, length, connection and closure. | Match liner openings to your equipment and outer bag; include how you retain the liner during discharge. |
| Lifting / handling | Describe forklifts, lifting frames, loop positions and your handling cycle. | Match loop length and clearance to your equipment, with handling and use instructions for the supplied bag. |
| Liner / sealing details | Provide film grade, thickness in microns, attachment and seal requirements. | Specify film tolerances, sealing details and test conditions alongside any outer-fabric coating. |
| Printing / traceability | Send artwork, language, batch identification and document-pocket needs. | Approve label content, print position and revision. Link your purchase specification to the drawing and agreed order records. |
| Site / special requirements | Share your SDS and electrostatic or special transport assessment where relevant. | Define electrostatic performance for the bag–liner system and review any transport-design requirements through their applicable documents. |
| Order / shipment | Provide quantity, destination, requested date and repeat-order forecast. | Agree commercial terms, production milestones and dispatch timing for your selected specification and destination. |
Manufacturing Network
Explore XIFA's
Explore XIFA's
Manufacturing Network
XIFA's manufacturing network includes Wenzhou, Jiangxi and Laos, supporting its wider industrial packaging business. Share your required bag construction, order volume and delivery destination to discuss the relevant production route and order coordination.
Industrial Packaging Manufacturing and Supply
XIFA manufactures woven packaging and FIBC bulk bags for overseas importers, distributors and industrial buyers. Your bag construction, liner and order requirements guide the production and quotation discussion.
Coordinate Your Packaging Order
From your approved drawing to shipment planning, XIFA coordinates the details that matter to your order. Discuss the production base, required documents and dispatch schedule for your selected FIBC specification.
Zhejiang · China
Wenzhou Manufacturing Facility
XIFA’s Wenzhou facility forms part of its woven-packaging manufacturing network. Discuss your custom packaging requirements and order coordination with our team.
Jiangxi · China
Jiangxi Manufacturing Base
Jiangxi Minzheng forms part of XIFA’s bulk-bag manufacturing network, connecting your FIBC construction requirements with production and scheduling discussions.
Laos
Laos Facility
The Laos facility extends XIFA’s manufacturing network. Your quotation review identifies the production and shipment arrangements relevant to your order.
Supplier Evaluation
Visit XIFA to Discuss Your Packaging Project
Meet XIFA’s team to discuss your bag specification, view the factory environment and plan your order. Bring your purchasing and technical questions for a focused conversation about your packaging requirements.
Customer Visit and Business Communication
Customer Reception at XIFA
International Business Meeting
Packaging Business Discussions
Customer Visit to XIFA Facilities
International Business Engagement
FIBC Buyer FAQ
Mining and Minerals FIBC Bags:
Mining and Minerals FIBC Bags:
Common Buyer Questions
Clarify your specification, documentation and order requirements before requesting a mining and minerals packaging quotation.
What material information do you need for a quotation?
Name your mineral or concentrate and describe particle size, shape, bulk density, filling weight and handling conditions.
- Include temperature and storage exposure where relevant, with an SDS when needed.
- Your material data allows the discussion to focus on the seams, liner, openings and load rating relevant to your mineral.
How are special transport requirements reviewed?
Provide the actual material, current SDS where relevant, route and intended transport mode.
- Review any special packaging requirements against the available bag design and its documentation.
- Where special transport requirements apply, the review focuses on the documented design, permitted cargo and intended shipment conditions.
What is the minimum order quantity?
Your MOQ is confirmed for the bag construction, liner and printing specified in your enquiry.
- Include your expected purchase quantity and replenishment forecast when requesting a quotation.
- XIFA can then quote the configuration and quantity you need.
- Include your replenishment forecast so the order discussion also covers repeat supply.
Can we request a sample before ordering?
Discuss a sample matched to the specification you want to evaluate.
- Define what you want to evaluate: dimensions, openings, closure, liner retention or equipment fit.
- Agree the sample type, charges and dispatch arrangements, together with any performance records needed for specification approval.
How is the production lead time confirmed?
Share your quantity, requested date and specification status.
- XIFA reviews the drawing, liner, artwork and materials to confirm your production schedule.
- Agree when the quoted lead time begins and distinguish factory dispatch from arrival at your destination.
- Changes after approval may require a revised schedule.
Can you support repeat orders for distributors?
Discuss your forecast, specification revisions, artwork and shipment requirements with XIFA.
- Keep the approved drawing and order reference consistent when requesting repeat supply, and flag changes to your material or equipment.
- Agree your replenishment quantities, production slots and shipment arrangements so each repeat order has a clear delivery plan.
