For your lithium carbonate, the liner, closure and outer bag need to meet the same packing specification. Discuss custom empty FIBC jumbo bags with XIFA, with contact materials, filling weight and discharge connections matched to your product and equipment.
For lithium carbonate producers, processors, raw-material exporters and industrial packaging distributors.
Your lithium carbonate packaging brings together material protection, equipment fit and supply planning. XIFA’s wider industrial packaging experience helps you discuss these requirements with a manufacturing team, from bag construction to order specifications.
For lithium carbonate packaging, focus on contact cleanliness, moisture control, fine-powder containment and consistent specifications. Coordinate the liner, seams and closures with the requirements your purchasing and technical teams use for acceptance.
Specify the powder-contact resin, contamination limits and required inspection records. In a PET/AL/PE foil liner, PE contacts the powder, not the aluminium. Agree how empty liners are protected during handling and shipment.
Where a foil barrier is specified, review the laminate and heat-sealed openings together. Confirm moisture limits, storage duration and barrier-test conditions; the outer woven bag alone does not provide a sealed moisture barrier.
Specify sift-resistant seam treatment for the outer bag and a separately sealed liner. Match inlet and outlet closures to your equipment; seam protection helps contain fine powder but does not replace the liner’s barrier seal.
Drawing revisions, liner details and opening dimensions affect line compatibility. Keep your approved specification and labels tied to each order so changes receive clear technical review.
Start with your lithium carbonate bag requirements, then select the contact liner, barrier and any electrostatic features. Coordinate these options in one specification for your material, handling route and storage conditions.
CONFIGURATION 01
Combine a PP woven outer bag with a matched PE contact liner. Specify the film, fixing and closure around your filling weight and handling process.
CONFIGURATION 02
For grades requiring a higher barrier, discuss a PET/AL/PE foil laminate. PET protects the laminate, aluminium foil provides the barrier layer, and PE contacts the powder and forms the heat seal. Confirm performance for the selected liner and closure.
CONFIGURATION 03
Where your site assessment specifies electrostatic controls, select the outer bag and liner together. Review the classification, supporting records and operating conditions for the proposed assembly.
CUSTOMIZATION OPTIONS
Configure your lithium carbonate FIBC around contact materials, liner sealing and equipment connections. Match the body, seams, lifting loops and rated load to your filling weight and handling process.
Match your bag geometry to the packing and pallet layout.
Coordinate the body and liner on the same approved drawing.
Give your filling line a matched inlet and closure.
Include the steps used to close the pack after filling.
Connect your bag to the receiving process.
Check both openings together when approving the discharge connection.
Choose the contact film and protection as one structure.
Use the proposed liner’s data to assess your protection targets.
Fit the lifting points to warehouse equipment.
Agree loop details with your complete bag construction.
Set the rating around your lithium carbonate fill weight.
Use the rated SWL when setting your filling target.
Select the system for your operating environment.
Type C requires grounding; Type D operates without bag grounding under its specified conditions.
Send your material name, target fill weight and current bag drawing or photograph. You can clarify the remaining configuration and order details with XIFA during quotation review.
Use the construction references below to discuss your bag, liner and equipment connections. Final dimensions and performance are confirmed for your lithium carbonate grade and handling conditions.
| Specification | Reference Construction | Confirm for Your Order |
|---|---|---|
| Bag dimensions / payload | LFP manual references: 770 × 770 × 950 mm / 400 kg 900 × 900 × 880 mm / 430–500 kg 900 × 900 × 1,100 mm / 1,000 kg | For lithium carbonate, recalculate using measured bulk density, usable volume and filling clearance. Confirm SWL (safe working load) and safety factor for the approved design. |
| Outer bag / body | Virgin PP woven fabric; four-panel or baffled body for review. Manual reference: body 160–180 g/m²; base 180–200 g/m². | Match strength, filled shape, liner fit and pallet footprint. Fabric weights are reference values, not a complete load rating. |
| Foil liner / contact layer | PET / AL / PE laminate. Manual layer references: PET 12–15 μm; AL 7–9 μm; PE 50–80 μm. | PE contacts the powder and forms the heat seal. Approve individual layers and total thickness for the selected liner. |
| Barrier / sealing | Foil barrier liner with heat-sealed openings; separate closure for outer-bag spouts. | Agree moisture and oxygen barrier targets, test conditions and seal-integrity evidence for the actual liner construction. |
| Filling / discharge / liner fit | Inlet and outlet matched to your equipment; liner allowance and retention defined on the drawing. | Confirm spout diameter and length, sealing access and outlet alignment. Allow sufficient liner movement without excessive tension. |
| Seams / lifting | Sift-resistant seam treatment and reinforced lifting connections for review; four-loop arrangement as a starting point. | Match fork spacing, loop clearance and lifting method. Review seam containment and load evidence for the complete bag. |
| Static / special handling | Type C or Type D bag–liner combination for review where required; nitrogen or vacuum connections if specified. | Select against the product SDS and site assessment. Confirm combination-specific documentation and compatibility with packing equipment. |
| Cleanliness / traceability | Virgin contact materials, agreed contamination controls and batch identification. | Confirm material declarations, relevant inspection records, approved drawing revision and order labels before production. |
Construction references are drawn from Jiangxi Minzheng’s LFP aluminium foil FIBC technical manual. Dimensions are external L × W × H. LFP payloads and material references are starting points for discussion, not validated lithium carbonate specifications. Final construction and performance require approval for your material and operating conditions.
XIFA's manufacturing network includes Wenzhou, Jiangxi and Laos, supporting its wider industrial packaging business. Share your required bag construction, order volume and delivery destination to discuss the relevant production route and order coordination.
XIFA manufactures woven packaging and FIBC bulk bags for overseas importers, distributors and industrial buyers. Your bag construction, liner and order requirements guide the production and quotation discussion.
From your approved drawing to shipment planning, XIFA coordinates the details that matter to your order. Discuss the production base, required documents and dispatch schedule for your selected FIBC specification.
Zhejiang · China
XIFA’s Wenzhou facility forms part of its woven-packaging manufacturing network. Discuss your custom packaging requirements and order coordination with our team.
Jiangxi · China
Jiangxi Minzheng forms part of XIFA’s bulk-bag manufacturing network, connecting your FIBC construction requirements with production and scheduling discussions.
Laos
The Laos facility extends XIFA’s manufacturing network. Your quotation review identifies the production and shipment arrangements relevant to your order.
Meet XIFA’s team to discuss your bag specification, view the factory environment and plan your order. Bring your purchasing and technical questions for a focused conversation about your packaging requirements.
Customer Visit and Business Communication
Customer Reception at XIFA
International Business Meeting
Packaging Business Discussions
Customer Visit to XIFA Facilities
International Business Engagement
Clarify your specification, documentation and order requirements before requesting a lithium carbonate packaging quotation.
Select the liner against your grade’s contact requirements, moisture limits, storage duration and packing process. A PE liner and a PET/AL/PE foil laminate are different options; agree the required barrier performance and sealing method before selection. The LFP manual provides construction references, but does not validate those specifications for every lithium carbonate grade.
Share your current drawing, specification sheet and photos of the bag and liner.
Your MOQ is confirmed for the selected lithium carbonate bag construction.
Discuss the sample you need and the points your team wants to evaluate.
Identify the records your purchasing and technical teams need for the selected bag.
Your schedule is agreed against the final specification, quantity and production availability.
Discuss your forecast, plant-specific connections and labelling requirements with XIFA.
